4-18 l Operation
Function
Control Function Descriptions
(continued)
Screen 45-49 require access
code 754.
SCREEN 48 (MDC Conveying
Option Shutdown on Alarm
Option)
SCREEN 49 (MDC Shutdown
Delay Option)
This screen can be used to determine if the
MDC conveying on function will shut-
down or continue to operate upon any
dryer alarm. When turned off, the MDC
blower will continue to cycle indefinitely.
Use this screen in the event Screen 48 is
enabled to set the amount of time the con-
veying function will continue to operate
once the dryer has alarmed. If Screen 48
is disabled, the conveying functions will
continue indefinitely.
off
C16
C
off
C17
H
Control function only
available for MDC only.
To Next Page
Loading...
