Chapter Two Hardware
2.1 H.264 standalone4 CH DVR
4 CH DVR Autonomo H.264
For the first use, please install the hard disk
○
1
Remove the screws on both ○
2
extracted from the next cover up ○
3
connect hard disk and mother board
sides of shell
○
4 re-
fix screws to hard disk ○
5
close cover ○
6
install the screws on both sides of shell
2.1.2 Rear panel
2.1.2.1 The front panel of DVR
2.1.2.2 The rear panel of DVR
To Next Page
Loading...
