9.3.1 Email Schedule
You need to configure the schedule to fully implement the email notification. The various email triggers are shown as color coded rings on the right hand
side of the schedule; click inside the ring corresponding to the email trigger you want to use and then drag the cursor across the days and times you
want to select, to deselect an area click or drag across on the cells or you want to remove in the same manner.
The colour codes on the
email schedule have the
following meanings:
Green: Motion detection.
Blue: Intelligent analysis
(not supported by this
DVR).
Red: Exception (HDD full,
HDD error, or Video
Loss).
Purple: PIR (Thermal
Detect).
To Next Page
Loading...
