Why is the Consilium Transceiver transmitter performance low?
If the Consilium Transceiver transmitter performance is low, it might be due to an exhausted magnetron, requiring a replacement. Another potential cause is that the high voltage is too low, which can be resolved by adjusting the high voltage values on the SRT_Power Board.
How to fix Consilium Transceiver when TXRX does not turn on?
If your Consilium Transceiver TXRX does not turn on, ensure the 24VDC voltage is properly connected to the transmitter, correcting any potential polarity inversion. Also, verify that the P1 link on PCB SRT_Power is closed and that the DL2 LED is lit correctly. If the voltage supply is too low, connect the 24VDC voltage to the transmitter properly.
What to do if Consilium Transceiver antenna does not rotate?
If the Consilium Transceiver antenna does not rotate, ensure the 24VDC voltage is properly connected to the controller. If the issue persists, consider replacing the SRT_Control Board or the Brushless Motor Controller.
Why Consilium SRT transmitter can't be controlled?
If the Consilium Transceiver transmitter can't be controlled, check the BNC video cable for electrical continuity and insulation from GND. Also, verify that the high voltage is not too low; if it is, adjust the high voltage values on the SRT_Power Board.
What to do if Consilium SRT transmitter does not generate RF?
If the Consilium Transceiver transmitter does not generate RF, it could be due to a damaged high voltage generator. In this case, replace the SRT_Power Board.
Why Consilium SRT antenna data can't be controlled?
If the Consilium Transceiver antenna data can't be controlled, check the input and output azimuth signals on the SRT_Control board, as the circuits might be damaged.
How to resolve Consilium SRT antenna rotation speed control issues?
If the Consilium Transceiver antenna rotates but the rotation speed cannot be controlled, replace the SRT_Control Board, as the Brushless Motor Controller may not be enabled properly.
General| Brand | Consilium |
|---|---|
| Model | SRT |
| Category | Transceiver |
| Language | English |
Main title of the product manual.
Category of the SRT system.
Provides detailed technical specifications of the system.
Provides a general overview of system operations.
Outlines maintenance procedures, periodicity, and requirements.
Details steps to identify and resolve potential system faults.
Provides step-by-step instructions for component replacement.
Lists replaceable parts with specifications and quantities.
Guidelines for optimal system performance and accessibility.
To Next Page