Consilium SRT - 5.2 Troubleshooting Procedures

SRT X-BAND RADAR SYSTEMS
TROUBLESHOOTING
304202P003 5.2 Rev. C
5.2 Troubleshhoting Procedures
5.2.1 Safety Precautions
WARNING
SET THE SAFETY SWITCH TO OFF AND HANG TO IT A
PLACARD READING “WORK IN PROGRESS DO NOT
SWITCH ON
WARNING
OPERATE WITH CARE ON THE TXRX UNIT BECAUSE OF
HIGH VOLTAGES AND HIGH POWER
5.2.2 Troubleshooting Operations
Table 5.2.1 - List Of Main Possible Failures, describes the failures that can be
met during the equipment functioning. If the failure occurred is not listed, call the
Manufacturer Service.