Consilium ST450EC - Page 29

29
ST450EC
v1.11
Status-LED action
Cause
Solution
GREEN continuous
Normal Operation
-
Yellow flashing
System failure
Check the sensor connections.
Check the sensing head
connections
Calibrate gas detector
RED continuous
Low Alarm (A1)
No defect.
Ventilate the area and clear
the cause of the gas
concentration.
RED flashing
High alarm (A2) or Overload
No defect.
Ventilate the area and clear
the cause of the gas
concentration.
BLUE flashing
User menu active
No defect
Temperature failure
Try to get gas detector within
its temperature
specifications.
Configuration corrupt
Contact the Consilium Service
department.
TEMP
ERROR
GASTYPE
0.00
ppm
CONFIG
ERROR
0.00
ppm
GASTYPE