User Manual
13
Chapter 8 Precaution during Operation
8.1 Pay attention to the patient and instrument condition constantly.
8.2 Patient and instrument can only be connected ECG cables.
8.3 Keep close observation of the patient and instrument, to make sure they are not moved
during operation.
8.4 Turn off the instrument after using.
8.5 Turn off the power, and remove the ECG cables slightly without force.
8.6 Properly keep the instrument and spare parts for operation next time.
8.7 Paper Loading
1) Dimension of the high-speed thermal Recording paper used in this instrument is:
80mm(W)*20m(L)
2) Open the cover of paper cabinet, take out the paper axis and install recording paper
according to the figure into the proper position inside.
3) Close the cover of paper cabinet. It's recommended to leave 2 cm of recording paper
outside.
To Next Page
Loading...
Need help?
General
