Contec 300G - 13.9 Sampling Settings

User Manual
27
In this, select the button【Default】, the system settings will back to the default.
The each function of option is as following:
Item
Optional content
Remark
Screen
saver
None/30Seconds/1Minute/
2Minutes/5Minutes/10Minut
es
The screen saver will be active after the selected
time without any operation. "None" means that
this function will not be used.
Back-Light
30Seconds/1Minute/2Minut
es/5Minutes/10Minutes/
Always On
The back-light will be turned off after the selected
time."Always On" means that the back-light will
be turned off never.
Auto off
1Minute/3Minutes/5Minutes
/
10Minutes/15Minutes/
30Minutes/60Minutes/None
The system will be shut down if no operation after
the selected time. None means the fuction is not
effective.
Low Power
None/Only Once /Always
The system will take which alarm scheme when
the power of battery is going to be used up.
Info Input
Before/After/None
Set up the time when inputting archive
information.
Filter Freq
[50Hz/35Hz]/[50Hz/25Hz]/
[60Hz/25Hz]/[60Hz/35Hz]
Set up the parameter of AC Filter and EMG Filter.
Language
[English]/[Chinese], etc.
Set up the default system language.
K-B Sound
On/Off
When pressing the key on keyboard, the
instrument will make a sound if "On" is
selected.otherwise it will no sound.
Demo Mode
On/Off
The system will run under demo version, if "On"
is selected. otherwise it will run under normal
version.
13.9 Sampling Settings
Select in the main interface, can start the following sampling setting dialogue box.