Contec 300G - 13.10 Analysing Parameter Settings; 13.11 Print Settings

User Manual
28
Select the button【Default】, the sampling settings will back to the default.
The each function of option is as following:
Item
Optional content
Remark
AC Filter
[ON]/[OFF]
Setting of default using AC Filter or not.
EMG Filter
[ON]/[OFF]
Setting of default using EMG Filter or
not.
DFT Filter
[ON]/[OFF]
Setting of default using DFT Filter or not.
Show Style
[3 Leads]/[6 Leads]/[12 Leads]
Setting of default show style.
Show Gain
[2.5mm/mV]/[5mm/mV]/[10mm/mV]
/[20mm/mV]/[40mm/mV]
Setting of default show gain.
Show Speed
[5mm/s]/[6.25mm/s]/[10mm/s]/
[12.5mm/s]/[25mm/s]/[50mm/s]
Setting of default show
speed.Auto-record and Rhythm record
can not support
5mm/s,10mm/s,12.5mm/s when
printing.
13.10 Analysing Parameter Settings.
Select the button in the main interface can start the following analyzing parameter
setting dialogue box:
The settings here will affect the diagnose hint of the real-time analysis, archive review and print
report during sampling.
Select the button【Default】, the system settings will back to the default.
Refer to follow:
Item
Remark
Rhythm
Lead
Setting the rhythm lead to analyze heart rate and print ECG in rhythm print
mode.
Premature
The system will use the inputted value as a standard of judging premature beat .
Pause
Time
The system will use the inputted value as a standard of judging pause beat.
Tachycardi
a
The system will use the inputted value as a standard of judging tachycardia.
Bradycardi
a
The system will use the inputted value as a standard of judging bradycardia.
13.11 Print Settings
Select the button in the main interface, can start the print setting dialogue box like
illustration: