Contec 300G - 13.6 Print and Review Settings

User Manual
26
Select 【OK】button, the system will apply the new settings and return to review interface.Select
【Cancel】 button, the system will return to review interface without applying the new settings.
Each function of the option is as following:
Item
Optional content
Remark
Print Mode
[Auto 3*4]/[Auto 2*6]/[Auto 4*3] and
any mode suit current archive
Setting of printing mode.
Rhythm
Lead
Anyone of 12 leads
Setting the rhythm lead to print ECG in
rhythm print mode.
Show Style
[3 Leads]/[6 Leads]/[12 Leads]
Setting of wave show style.
Show Gain
[2.5mm/mV]/[5mm/mV]/[10mm/mV]/
[20mm/mV]/[40mm/mV]
Setting of wave show gain.
Show
Speed
[5mm/s]/[6.25mm/s]/[10mm/s]/
[12.5mm/s]/[25mm/s]/[50mm/s]
Setting of wave show speed.Auto-record
and Rhythm record can not support
5mm/s , 6.25mm/s, 10mm/s, 12.5mm/s
when printing.
13.7 Date and Time Settings
In the main interface, select button, can start the following dialogue box showing the
date and time settings.
In this interface, the users can select and key to shift all the items, using and
to adjust the options content.
13.8 System Settings
In the main interface, select button, can start the following system settings dialogue box.