Contex SD3600 - Page 72

D-4
Appendix D --- Error codes
Error code 100-00126
Keypad Error code None
Level RD Correctable
Description SCSI time-out
Potential failed comp. External, Firmware
Corrective Action.
■
PC (cable, PC hardware/software etc.)
■
Firmware.
Error code 100-00127
Keypad Error code None
Level User Correctable
Description The scanner keyboard was used during communication
with the scanner.
Potential failed comp. User
Corrective Action.
■
User interaction.
Error code 100-00128
Keypad Error code None
Level User Correctable
Description The scanner has paper jam. Please reload the media.
Potential failed comp. User, Mech, LMx, SMPS, SUx
Corrective Action.
■
User interaction.
■
Related mechanical parts.
■
Lamp and Motor driver board (LMx)
■
Switch Mode Power Supply (SMPS)
■
Main controller board (SUx).
Error code 100-00129
Keypad Error code None
Level User Correctable
Description The scanner does not support this test command in normal
mode. Please restart test program.
Potential failed comp. User
Corrective Action.
■
User interaction.
Error code 100-00131
Keypad Error code None
Level User Correctable
Description The scanner is initializing. Please retry the operation when
the scanner has nished initializing.
Potential failed comp. User
Corrective Action.
■
User interaction.
Error code 100-00132
Keypad Error code None
Level User Correctable
Description The scanner is warming up. Please retry the operation
when the scanner has nished warming up.
Potential failed comp. User
Corrective Action.
■
User interaction.
Error code 100-50231
Keypad Error code BOOT (1)
Level RD Correctable
Description Firmware download is in progress
Potential failed comp. Firmware
Corrective Action.
■
Firmware.
Error code 100-50232
Keypad Error code ERR_GENERAL (3)
Level User Correctable
Description Firmware is incomplete. Please download new rmware
Potential failed comp. User
Corrective Action.
■
User interaction.