Contex SD3600 - Main Board Replacement

E-3
Appendix E, Scanner License
The rst dialogue is to set up the En-
ergy Star functions.
e Scanner Installation Wizard will
automatically launch when
WIDEsystem detects a new scanner.
When the scanner boot up and the
scanner is recognised by the PC it will
show up in WIDEsystem as “Not Acti-
vated” and not Calibrated.
Main Board Replacement
After the Main Board has been replace and it has
been veried that the scanner is now working cor-
rect, the scanner needs to be activated.
Prerequisites
All Main board (Spar Parts) are
shipped, “Not Activated” and without a
serial no.
1
2
3
4