Control Module Genus G1 Mark II - Terminal Power-Up Process; Power-Up Sequence Displays

Genus G1 MARK II Users Manual
UM3010-2
Power-Up
Several displays with the following messages appear in sequence during the normal G1
Terminal power-up process. In addition, during power-up, the Genus G1 terminal also
executes an internal firmware test.
G1 Loader splash screen displays
program and version numbers
Followed by “Loading Genus”
Genus splash screen displays program
and version numbers
Initializing Network displays the
default IP of the terminal
Initializing Flash displays, and IP
address remains for reference
Initializing RTC
Initializing System Files
Initializing Java VM
Revision B 10-30-07 13
Loader G1
Control Module Inc.
Program: xxx-xxx
VX.XX.XX
Loading Genus
Genus
Control Module Inc.
Program: xxx-xxx
VX.XX.XX
Initializing:
Network
IP: 192.168.0.62
Initializing:
Flash
IP: 192.168.0.62
Initializing:
RTC
IP: 192.168.0.62
Initializing:
System Files
IP: 192.168.0.62
Initializing:
Java VM
IP: 192.168.0.62