Genus G1 MARK II Users Manual
UM3010-2
Terminal Hardware
Hardware Specifications
Keypad - with local buffering
10 Numeric Keys (0 through 9)
6 Function Keys
Function keys alternately can produce punctuation symbols.
Clear and Enter Keys
Home, Up, Down, Left, and Right arrow direction keys
Shift key
All keys are programmable
Display
4 Line by 20 Character Backlit LCD Display
Media Readers
2 Internal reader ports, 1 External reader port, 1 Barcode wand port
Magnetic Track 1 and 2
Barcode Code 39 and code 39 full ASCII, Interleaved 2of5, Code 128
Proximity allows up to a 99 bit badge (HID, MOTOROLA)
Smartcard (Mifare, iClass)
Biometrics (Fingerprint)
Beeper
Variable duration monotone beep
Variable duration warble beep
Emit a series of beeps
Host Interface
RS232, RS485
10/100 Ethernet
Modem option via serial port (PPP)
WiFi option
External Control
Relay Output—30VDC @ 1A
LED
Two Status LEDs – Valid (green), Invalid (red)
Power Requirements
15 -20 VDC
Environment
Operating 0°to 50°C (32° to 122°F)
Storage -20° to 70°C (-4° to 158°F)
Humidity 0 to 90 % non-condensing
Revision B 10-30-07 7
To Next Page
Loading...