Genus G1 MARK II Users Manual
UM3010-2
Terminal Features
Memory Configuration The Terminal is equipped with 32 Mb of dynamic
memory, 2 Mb of non-volatile memory for data retention, and 8 Mb of Flash
memory for program storage, and user defined long term storage.
Programmability The Terminal is designed to be a Java-capable embedded
data collection platform. Users may create, load, and execute PersonalJava
compliant applications that utilize existing OEM classes for display, keyboard,
biometric, barcode, magnetic, proximity, smartcard (Mifare, iClass), and
Digital inputs and outputs (DI/DO). A software development kit (SDK) is
available separately that provides development documentation, development
support, and samples for the use of the OEM classes.
Data I/O The Terminal provides for program control for three digital inputs, and
Wiegand Data0/Data1 input or output signals. A relay port is also provided for
external low voltage devices.
Host Interface The Terminal comes with a dedicated Ethernet port for
connection to 10/100 Ethernet networks. DHCP or static IP address
configuration is supported.
Display The Terminal is equipped with a 4 line by 20 character liquid crystal
display (LCD) The full alphanumeric character set is supported. LED back-
lighting provides viewing in low light conditions. The display has a CMI
standard lens.
Keypad The Terminal is equipped with a 3 x 8 membrane keypad, with three
horizontal rows of eight keys each. The terminal is available with a CMI
Standard Overlay, or a custom overlay created per customer requirements.
Power The configuration uses a +18 VDC .8 amp power pack to power the
terminal. The power pack is UL listed and CSA certified.
Audio Annunciator This is programmable with variable tone and duration
capability.
Revision B 10-30-07 6
To Next Page
Loading...