Control Module Genus G1 Mark II - Troubleshooting Terminal Issues (Continued); Classes.jar and App.jar Errors; RAM File System and RTC Initialization Errors

Genus G1 MARK II Users Manual
UM3010-2
Terminal Issue Possible Causes Resolution
Terminal displays “Error
opening Classes.jar”
Terminal does not have the
Classes (or API) loaded.
Reload Classes to the
terminal. Refer to Steps to
Re-Program Genus
Firmware section in this
document.
Terminal displays “Error
opening App.jar”
Terminal does not have an
application loaded.
Load Application to the
terminal. Refer to Loading a
Customer Defined Java
Application section in this
document.
Terminal displays “Error
initializing RAM File System”
The SRAM on the memory
board could be failing.
Refer to the Service and
Technical Support section in
this document.
Terminal displays “Error
initializing RTC”
The Real Time Clock is not
functioning.
Refer to the Service and
Technical Support section in
this document.
Revision B 10-30-07 56
Error Initializing
RAM File System
Error Initializing
RTC
Error Opening
Classes.jar
Error Opening
App.jar