Control Module Genus G1 Mark II - Loader Mode Operation (Continued); Network Settings Input; Default Load Procedure

Genus G1 MARK II Users Manual
UM3010-2
Press to advance to the next network
setting.
Press F1 to force the default to load.
If the server cannot be found the Terminal will
display the “Server not found” message, followed
by the prompt to enter a new TFTP server IP.
Revision B 10-30-07 62
Enter SUBNET MASK:
255.255.255.000
SETTINGS SAVED
Force Default?
<F1=Yes><C=No>
Enter GATEWAY:
000.000.000.000
Default
Control Mod Inc.
Program: XXX-XXX
VX.XX.XX
Enter TFTP Server
IP: 010.010.000.001
Loading Default
Server not found