Control Techniques M'Ax 406

*
34 M’Ax User Guide
Issue Number: 4
1
Set parameter
at .
0.24
1
Ramps
enable
2
NO
4
Is deceleration to be fixed at the
user-defined rate?
Y
ES
Go to routineStarting
3
Set parameter Fast
ramp select at .
0.27
1
Set parameter at the required
acceleration rate (in s/1000RPM).
0.25
Set parameter at the required
deceleration rate (in s/1000RPM).
0.26
5
When necessary, deceleration
time is automatically extended
to prevent over-voltage trips.