Converteam MVS3007 - Page 11

ALSPA PROFIBUS Field Bus Coupler Table of Contents
(09/06) Technical Manual xi
8.5.3 Protocol P75.03 8-2
8.5.4 Run On Power Up P75.04 8-3
8.5.5 Configure Link P75.05 8-3
8.5.6 Source Loss Action P75.06 8-3
8.5.7 Freeze/Fallback Action P75.07 8-4
8.5.8 Control Words P75.08 & P75.10 8-4
8.5.9 Received Data Parameters P75.22 to P75.27 8-5
8.5.10 References P75.12 to P75.21 8-5
8.5.11 Transmitted Data, P75.30 to P75.35 8-6
8.5.12 Reference Scaling and Masking, P75.28 to P75.29 8-8
8.5.13 Data Spy Parameters P75.36 to P75.41 8-9
8.5.14 Data Errors P75.42 to P75.45 8-9
8.5.15 Communications Status P75.46 8-10
8.6 Fieldbus Configuration Menu 8-11
9. Maintenance....................................................................................... 9-1
10. Diagnostics ...................................................................................... 10-1
10.1 Menu 74 Diagnostics 10-1
10.1.1 Faults 10-1
10.1.2 PROFIBUS Warning Fault Code 10-1
10.1.3 PROFIBUS Trip Fault Code 10-1
10.2 Menu 75 Diagnostics 10-2
10.2.1 Faults 10-2
10.2.2 PROFIBUS Warning Fault Code 10-2
10.2.3 PROFIBUS Trip Fault Code 10-2
10.3 MVS3007-4001 and MVS3007-4002 Fieldbus Coupler Indicator LEDs 10-3
10.4 Spares and Re-order Information 10-3
Appendix A. Configuration Example........................................................1
A.1 Check the PROFIBUS Hardware 1
A.2 Decide what information needs to be transferred. 1
A.3 Configure the PROFIBUS Link 2
A.4 Adding Drive Parameters 2
A.5 Simple Parameters 2
A.6 Reference Parameters 3
A.7 Control Bits 5
A.8 Status Word 6
A.9 Data for Master Device Configuration 7
A.10 Using PROFIBUS Data Spy 7
A.11 Check For Data Errors 8
A.12 Fallback Values 8
A.13 Warning on Loss of PROFIBUS Link 9
Appendix B. Configuration Tables...........................................................1
Appendix C. Fault Return Form................................................................1