Overview ALSPA PROFIBUS Field Bus Coupler
vi Technical Manual (09/06)
OVERVIEW
Section Page
1. Introduction.......................................................................................... 1-1
A brief description of the PROFIBUS board for MV3000e drives.
2. Specifications....................................................................................... 2-1
Provides electrical, mechanical and environmental specifications for
the PROFIBUS board, also safety and EMC standards, and
disposal instructions.
3. Installation............................................................................................. 3-1
Describes how to properly install the PROFIBUS board into
MicroCubicleâ„¢ drives and DELTA systems. Topics covered include
handling and storage, mechanical and electrical installation. Shows
how to configure the various PCB links and switches.
4. Commissioning.................................................................................... 4-1
Explains how to commission a PROFIBUS board using the drive
parameters described in Section 5.
5. PROFIBUS Protocol..............................................................................5-1
Explains the PROFIBUS protocol.
6. Parameters ............................................................................................6-1
Overview of drive parameters usage.
7. Menu 74 Parameters ............................................................................. 7-1
Describes in detail the drive parameters used to configure and
control the PROFIBUS board.
8. Menu 75 Parameters ............................................................................. 8-1
Describes in detail the drive parameters used to configure and
control the PROFIBUS board.
9. Maintenance .......................................................................................... 9-1
Describes the maintenance philosophy for the PROFIBUS board.
10. Diagnostics.......................................................................................... 10-1