11976798 Page 1
1. INTRODUCTION
About this Manual
This manual is divided into three chapters:
1. Introduction: this describes the parts of an Intruder Alarm System (IAS)
based on the 9751 control unit.
2. Technical description: this defines the operating parameters of the different
parts of the system.
3. Installation: this explains the tasks involved in installing an IAS using the
9751 control unit.
The control unit is designed to be fully programmable to suit individual user
and site requirements. Installers can program units either from a keypad or
using a program called Downloader on a PC running Windows (Windows XP).
When programming from a keypad, instructions are entered using the three-
digit commands described in the Programming Guide.
To Next Page
Loading...
