COP Security XT Series - 3-1-6 Time Stamp Format Options

14
3-1-6. SETUP-SYSTEM-TIME STAMP FORMAT
1) The position and colour of the Time & Date displayed during playback can be changed from the [TIME
STAMP FORMAT] Sub-Menu.
2) Select a display format by using (▲)(▼) button and press the [ENTER] button to apply.
3) Some Alternative displays are shown below.
4) Press the [ENTER] button to accept the choice.
3-1-7. SETUP-SYSTEM-CURRENT STATUS VIEW
This Sub-Menu allows the System Information to be displayed, or hidden, on the Main Monitor Screen.
1). From the [CURRENT STATUS VIEW] sub-menu, Select YES or NO by using (▲)(▼) button and press
the [ENTER] button to apply. (This will not affect the Time & Date Display settings)
2) Press [MENU] after the change is completed.
[SETUP-SYSTEM-TIME STAMP FORMAT]
- <TOP-WHITE>
TIME STAMP FORMAT
-TOP-WHITE
-TOP-BLACK
- BOTTOM-WHITE
- BOTTOM-BLACK
-OFF
- BOTTOM-WHITE
2005/06/20 12:30:05
TOP-WHITE
BOTTOM-BLACK
TOP-BLACK
BOTTOM-WHITE
OFF
2005/06/20 12:30:05 2005/06/20 12:30:05
2005/06/20 12:30:05
3. SETUP
[SETUP-SYSTEM]
-<ADMIN PASSWORD>
- USER PASSWORD
- PASSWORD CHECK
- TIME SETUP
- TIME FORMAT
- TIME OSD FORMAT
- TIME STAMP FORMAT
- CURRENT STATUS VIEW
- VGA FREQUENCY CHANGE
- SOFTWARE UPDATE
- DEFAULT SETUP
[SETUP-SYSTEM]
-<ADMIN PASSWORD>
- USER PASSWORD
- PASSWORD CHECK
- TIME SETUP
- TIME FORMAT
- TIME OSD FORMAT
- TIME STAMP FORMAT
- CURRENT STATUS VIEW
- VGA FREQUENCY CHANGE
- SOFTWARE UPDATE
- DEFAULT SETUP
[SETUP-SYSTEM-CURRENT STATUS VIEW]
> ON
CURRENT STATUS VIEW
-OFF
-ON
- OFF