COP Security XT Series - Page 26

26
OPTIONS (continued)
1) Highlight [POST-RECORD TIME] using (▲)(▼)buttons, press [ENTER] button to enter the List.
2) Five options are displayed. Use the Cursor and ENTER buttons to select the period for the
recording to continue AFTER the event has stopped.
3) Press the [MENU] button to exit the Sub-Menu.
1) Highlight [PRE-RECORD TIME] using (▲)(▼)buttons, press [ENTER] button to show the option List.
2) Six options are displayed. Use the Cursor and ENTER buttons to select the period (or None) the
recording will continue for AFTER the event has stopped.
3) Press the [MENU] button to exit the Sub-Menu.
1) Highlight [POP-UP DISPLAY] using (▲)(▼)buttons, press [ENTER] button to show the On/Off List.
2) Use the Cursor (▲)(▼) and ENTER Buttons to select either ON or OFF.
3) Press the [MENU] button to exit the Sub-Menu.
3. SETUP
[SETUP-REC-EVENT-OPTIONS]
POST-RECORD TIME : <> 10 SEC>
PRE-RECORD TIME : > 4 SEC
POP-UP SCREEN : > YES
[SETUP-REC-EVENT-OPTIONS]
POST-RECORD TIME : <> 10 SEC>
PRE-RECORD TIME : > 4 SEC
POP-UP SCREEN : > YES
POST REC TIME
> - 10SEC
> - 30SEC
> - 1 MIN
> - 5 MIN
> - 10MIN
-1 MIN
PRE REC TIME
>NO PRE REC
> 2 SEC
> 4 SEC
> 6 SEC
> 8 SEC
> 10 SEC
> 6 SEC