30 JOLLY Operator’s manual
SAFETY REGULATIONS
The equipment is intended for professional use only.
WARNING
Only one operator may work on the equipment at a time.
WARNING
Failure to observe these instructions and the relative danger warnings can cause
serious injury to the operator and others. Do not power up the machine before you
have read and understood all the danger/warning/attention notices in this manual.
This machine must be used only by qualified and authorised personnel. A qualified
operator is construed as a person who has read and understood the manufacturer’s
instructions, is suitably trained, and is conversant with safety and adjustment procedu-
res to be adhered to during operations. Operators are expressly forbidden from using
the machine under the influence of alcohol or drugs capable of affecting physical and
mental capacity.
The following conditions are essential:
- The operator must be able to read and understand all the information in this manual.
- Make sure you have a thorough knowledge of the capabilities and characteristics of
this machine.
- Keep unauthorised persons well clear of the area of operations.
- Make sure that the machine has been installed in compliance with established legi-
slation and standards.
- Make sure that all machine operators are suitable trained, that they are capable of
using the machine correctly and that they are adequately supervised during their
work.
- Never leave nuts, bolts, tools or other equipment on the machine to avoid the risk
that they could become entrapped between moving parts during work.
- Do not touch power lines or the inside of electric motors or other electrical equip-
ment until the power has been disconnected and locked out.
- Read this manual carefully and learn how to use the machine correctly and safely.
- Always keep this user manual in a place where it can be readily consulted when
working with the machine and consult it whenever you are in need of confirmation or
explanations.
WARNING
Do not remove or deface the safety Danger, Warning or Instruction decals. Replace
any missing or illegible Danger, Warning or Instruction decals. Missing or damaged
decals can be obtained at your nearest Corghi dealer.
- When using and carrying out maintenance on the machine observe the unified indu
-
strial accident prevention regulations for high voltage industrial equipment.
- Any unauthorised alterations made to the machine automatically release the ma-
nufacturer from any liability in the case of damage or accidents attributable to such
alterations. Specifically, tampering with or removing the machine’s safety devices is a
breach of the regulations for industrial accident prevention.
To Next Page
Loading...
