Corghi JOLLY - Machine Kit; Optional Accessories; Specified Conditions of Use

32 JOLLY Operator’s manual
MACHINE KIT
Grease gun (or brush) ...............................................................................................900432739
Brush (or grease gun) ................................................................................................900415248
Inflator gun (not T.I.) ..................................................................................................900434804
Tyre lever ....................................................................................................................900444238
OPTIONAL ACCESSORIES
Set of 4 clamps for 15-22” motor cycle wheels .......................................................801240462
Set of 4 clamps for 8” wheels....................................................................................801241011
Vertical slide insert kit ..............................................................................................801242613
Set of 4 clamp covers ................................................................................................801241010
Bead presser lever kit ...............................................................................................801244645
Kit of 6 covers for tyre levers....................................................................................801246241
Gauge kit (HPT-TA mount-demount calibration) ................................................... 801247863
Kit of 60 covers for tyre levers..................................................................................801247954
Plastic mount/demount head tool kit......................................................................801250309
Bead presser pliers ...................................................................................................801435685
Clamp guards .............................................................................................................801254342
SPECIFIED CONDITIONS OF USE
The JOLLY tyre changer is designed exclusively for mounting and demounting tyres
using the tools with which the machine is equipped and in accordance with the instruc-
tions in this manual.
WARNING
Any other operations carried out on the machine are considered improper use and
shall be construed as negligence.
The machine is equipped with an inflation system that is independent from the
systems described above. Extreme caution must be exercised during the use of the
machine inflation system (read INFLATION heading).
WARNING
When working with the machine it is strongly recommended to avoid using equip-
ment or tools not manufactured by CORGHI.
Figure 6 shows the positions assumed by the operator during the various stages of
work with the machine.
A Bead breaker
B Tyre demounting and mounting
C Inflation area.