JOLLY Operator’s manual 39
GB
➥ Renew bead breaker cylinder
Bead breaker cylinder leaks air around the rod
Air seal worn
➥ Renew seals
➥ Renew bead breaker cylinder
Table top will not rotate in one direction or the other
Inverter faulty
➥ Renew inverter
Table top will not rotate in either direction
Inverter faulty
➥ Renew inverter
Belt broken
➥ Renew belt
Gear unit broken
➥ Renew gear unit
Table top doesn’t turn. Motor whines
Motor runs two-phase
➥ Renew inverter
➥ Check that there are no detached wires on the plug, electrical socket, motor termi-
nal board or inverter
➥ Renew motor
Gear unit noisy. The table top makes 1/3 of a revolution and then stops
Gear unit seizing
➥ Renew gear unit
Table top fails to clamp wheels
Table top does not clamp rim
➥ Renew table top cylinder
Clamp grippers are worn
➥ Renew clamp grippers
Table top mounts or demounts tyres with difficulty
Insufficient belt tension
➥ Adjust belt tension (fig.31) or renew it
To Next Page
