Cornelius Nueva Tower - Replacing the Hood; Replacing the Lighting Kit

Repairs
Cornelius Deutschland GmbH
Document no. TD0003100
Version 18/03/2019, Index 0
Installation and service manual Tower
Nueva
20
7.6 Replacing the hood
NOTICE!
Multiple configuration options for the hood of the unit, with and without promotional displays, are available. Re-
placing the hood is identical for all hoods and is described here analogously using an example.
7.7 Replacing the lighting kit
NOTICE!
Multiple lighting kit variants are available for the unit. Replacing the lighting kit is identical for all lighting kits and
is described here using an example.
The lighting kit comprises the following components:
• Retaining plate
•LED strip
• Voltage transformer
Prerequisites References
The unit has been disconnected from the power supply. see chapter 4.1
Spare parts ID/reference Qty/
amount
Comment
Hood Various 1 For the part number of the hood installed on your unit,
see chapter 10
1. Remove the fastening bolts (Fig. 32/2) from the hood (Fig. 32/1).
2. Lift and remove the hood (Fig. 32/1) from the unit.
3. Remove and install any promotional displays that might be installed.
- Taxi cab hood with promotional sign; see chapter 7.3.
- Moonlight disc; see chapter 7.4.
- Product labels; see chapter 7.5.
4. Position the new hood (Fig. 32/1) on the unit.
5. Attach the hood (Fig. 32/1) using the fastening bolts (Fig. 32/2).
Fig. 32
1
22
Prerequisites References
The hood has been removed. see chapter 7.6.
Spare parts ID/reference Qty/
amount
Comment
Lighting kit 220112230 1 – Taxi cab hood with promotional sign, 5 + 6 dispensing valves
– Moonlight disc, 5 + 6 dispensing valves
– Product labels, 5 + 6 dispensing valves
Lighting kit 220112231 1 – Taxi cab hood with promotional sign, 8 dispensing valves
– Moonlight disc, 8 dispensing valves
Lighting kit 220112232 1 – Product labels, 8 dispensing valves
Lighting kit 220112233 1 – Taxi cab hood with promotional sign and product labels, 5 + 6 dis-
pensing valves
– Moonlight disc and product labels, 5 + 6 dispensing valves
Lighting kit 220112234 1 – Taxi cab hood with promotional sign and product labels, 8 dispens-
ing valves
– Moonlight disc and product labels, 8 dispensing valves
1. Remove the fastening bolts (Fig. 33/1) from the retaining plate (Fig. 33/2).
2. To the extent permitted by the electrical cables, lift the retaining plate (Fig. 33/2) from the unit.
Fig. 33
1
2
1