22
NOTE:
• If power outage occurs while the oven is in Sabbath mode, the oven will
resume in Sabbath mode when power is restored.
SETTING DISPLAY BRIGHTNESS
1. Press Settings once. List of settings appears in the display.
2. Press START to go to next page.
3. Press 7 to select "Brightness" from the list.
4. Press 1 to toggle and select High or Low.
5. Press Settings to accept the change.
SETTING TEMPERATURE CALIBRATION
This oven may cook differently than the one it replaced. Use the oven for a
few weeks to become more familiar with it before adjusting the thermostat
settings. Do not use thermometers, such as those found in grocery stores, to
check the temperature setting of your oven. These thermometers may vary
20–40 degrees.
1. Press Settings once. List of settings appears in the display.
2. Press START to go to next page.
3. Press 8 to select "Calibration" from the list.
4. Press 1 to toggle and select cooking mode.
5. Press 3 or 6 to increase or decrease temperature offset between 30°F
(18°C) and -30°F (-18°C) for the selected cooking mode.
• +30°F (+18°C) will reduce the oven temperature and cook food less.
• -30°F (-18°C) will increase the oven temperature and cook food more.
6. Press Settings to accept the change.
To Next Page
Loading...
Need help?
General
