6
DC-ITD-PS7MAN01.A www.dodtec.com
JAN 2019 815-788-5200
Chapter 2 – Safety Instructions
Read and understand the following information to ensure that the Gas Detector is used correctly. The Gas
Detector must always be used in accordance with relevant laws and regulations, and all wiring, installation,
and other work associated with the Gas Detector must be performed by qualified personnel.
Warning
• When the Gas Detector detects a gas leak, carry out the procedures stipulated by
your company in response to gas leaks.
• The Gas Detector must be grounded to prevent electric shock.
• The Gas Detector is not explosion-proof. It must be installed in a safe location.
Caution
• Do not disassemble or modify the unit or change its construction or circuitry in
any way. Doing so may impair the unit's performance.
• The Gas Detector is not drip-proof and must be installed in a location free from
spattering water.
• The unit must be used in accordance with prescribed laws and regulations.
• Please turn the power switch located on the front of the base unit OFF when
attaching or removing the main unit. If this is done with the switch left ON, the unit
may become damaged, or give false alarms.
To Next Page
Loading...
