COX CXO300 - Powerhead Oil Filter Change

6.0 MAINTENANCE
6.0 MAINTENANCE
66
CXO300 OWNER’S MANUAL
6.4.6 CHANGING THE POWERHEAD OIL FILTER
To change the powerhead oil filter
1 Position the outboard vertically. If your outboard has been tilted for storage or recently operated, allow
5 minutes for oil to drain from the oil filter.
2 Remove the upper cowling by opening the latches and lifting upwards.
3 By hand, or using a removal tool if tight, turn the oil filter cartridge counterclockwise to loosen.
 NOTE
Some oil may leak from the underside of the filter while loosening and removing. Have a lint-free
cloth ready and turn the filter cartridge-down as soon as possible.