Need help?Do you have a question about the Coxo C-SMART-1 Pro and is the answer not in the manual?
General| Programs | 9 |
|---|---|
| Device Type | Cordless |
| Display | LCD |
| Auto Power Off | Yes |
| Waterproof | No |
| Type | Endomotor |
| Torque Range | 0.6-5.2 Ncm |
Adjusts the sound volume to 4 different levels: high, low, minimum, and limited off.
Adjusts the screen brightness to 4 different levels: brightest, bright, darker, and dark.
Explains symbols used within the operation manual for clarity and understanding.
Details symbols found on product packaging, the device itself, and its components.
Details the essential first steps for removing residues before cleaning and disinfecting accessories.
Provides instructions for manual cleaning and disinfection procedures for the device's accessories.
Lists and illustrates all standard components included with the device.
Details the physical structure and labeled parts of the control unit.
Instructions for properly connecting and disconnecting the motor handpiece from the unit.
Guidance on how to connect and disconnect the contra-angle to the motor handpiece.
Steps for inserting and removing the lighting device into the motor handpiece.
Detailed instructions for inserting and removing the endodontic file into the device.
Explains how to connect accessories for the M1 mode (apex locator only).
Details the connection procedure for the M2 mode (motor only).
Describes the connection for M3 mode, combining motor and apex locator functions.
Guide to setting language, understanding the LCD panel, and operating the control panel.
Instructions on how to properly power the device on and off.
Steps to select and change the device's operating language.
Detailed explanation of the LCD panel, its sections, and displayed information.
How to adjust speed and torque settings for different file systems.
Details on the auto reverse function and how to enable or disable it.
Information on the LED lighting function and its delay time settings.
Instructions for starting, stopping, and reversing the motor handpiece.
Details the specific connection method for the M3 dual mode operation.
Guidance on calibration for M3 mode, especially with new contra-angles.
Describes the working area display and parameters in M3 mode.
How to select the file system and individual files within M3 mode.
To Next Page