ii
The following signal words and meanings are intended to explain the levelsof risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
MEANING
iim
Indicates an imminently hazardous situation, which, if not avoided, will
result indeath or serious injury.
Indicatesa potentiallyhazardous situation, which, ifnot avoided, could
result in death or serious injury.
A
CAUTION:
CAUTION:
Indicates a potentially hazardous situation, which, ff not avoided, may
result in minor or moderate injury.
ilil
(WithoutSafety Alert Symbol) Indicates a situation that may result in
property damage,
ill
SERVICE
Sen/icing requires extreme care and knowledge and
should be performed on{y by a qualified service tech-
nician. For service we suggest you return the product to
your nearest AUTHORIZED SERVICE CENTER for repair.
When servicing, use only identical replacement parts.
_k WARNING: To avoid serious personal injury, do not
attempt to use this product until you read thoroughly
and understand completely the operator's manual.
Save this operator's manual and review frequently for
continuing safe operation and instructing others who
may use this product.
_k WARNING:
O
The operation of any power tool canresult in foreign objects being thrown into your eyes, which can
resultin severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1,
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General