CraftUnique CraftBot 3 User Manual

Key information, warnings, and cautions for safe operation of the printer.

Guide to safely unpacking the printer and checking all included accessories.

Instructions for installing encoders, filament guides, and spool holders.

Steps for mounting filament spools and attaching the power cord.

Guide to powering on, setting language, heat measure, and clock.

Steps to connect the CraftBot 3 printer to a wireless network.

Procedures for heating the printer and loading/unloading filament.

Instructions for safely removing filament from a preheated extruder.

Ensuring the build plate is correctly leveled for optimal print quality.

Calibrating Z and X-Y axes for dual head printing accuracy.

Understanding and configuring the Filament Monitoring System.

Using the setup wizard and adjusting interior/display lighting.

Activating and managing the printer's various fan settings.

Configuring sound notifications for printer operations.

Selecting print modes and resetting printer settings to factory defaults.

Using CraftWare software to convert 3D designs into printable gcode.

Printing objects directly from a USB flash drive.

Modifying print settings like temperature, speed, and pausing during printing.

Installing and using the CraftBot mobile application for printer control.

Steps for cleaning the printer's exterior and build plate.

Instructions for lubricating the printer's Z-axis rods and linear rails.

Methods for preventing and resolving extruder clogs.

Step-by-step guide on how to remove the printer nozzle.

Updating the printer firmware using the CraftPrint software.

Specific steps for updating firmware on older printer models.

Guide for reapplying a protective Kapton sheet to the build plate.

A list and explanation of common G-code and M-code commands.

Links to user manuals, firmware, and the official YouTube channel.

Details regarding the product's guarantee and warranty terms.

Legal statement outlining CraftUnique Ltd.'s liability limitations.