34
CraftBot 3
11. FIRMWARE UPDATE
11.1. FIRMWARE UPDATE WITH SOFTWARE
Updating the rmware adds new function(s) and improves performance.
CAUTION: NEVER turn OFF the computer or disconnect the USB cable while updating the rmware.
1. Download CraftPrint® software from Craftunique® website: https://craftbot.com/craftware/
2. Install the CraftPrint® application on your computer.
3. Download the pr3Dator® rmware le from Craftunique website and extract the ZIP le on your
computer. Please read the attached Release Notes. https://www.craftunique.com/rmware
4. Connect the printer to your computer with USB cable.
5. Open the CraftPrint program.
6. Select the „Load custom rmware from le” from „ …” menu
7. Select and open the *.rmware le
To Next Page
Loading...
