CraftUnique CraftBot 3 - Wireless Network Connection

10
CraftBot 3
4.5. CONNECTING THE CRAFTBOT3 PRINTER TO A WIRELESS
NETWORK
• Select the Settings menu n the LCD screen and go to page
3 with right arrow. Select the Wi-Fi icon
• Select the search Wi-Fi Network” icon – the third icon in the
bottom row.
• Scroll down with up-down arrows. Select desired network
with the left arrow.
• Enter password.
• Conrm password with the tick mark
. In the right bottom
corner.
• Selected Wi-Fi network is displayed indicating host name
and LAN IP.
• By pressing the “eye” icon you can toggle the wi’s visibility
on / o.
• SSID: You can modify the printer’s unique identier name.
click on the SSID icon to the right make your changes and
conrm it.