Crane BEVMAX 6 - Page 101

BevMax_Media_Programming_10_6_10 Page 99 of 106
08/15/2013
ALL BILLS ARE REJECTED
Main power Off /
disconnected.
Apply power.
All bills are rejected.
Blown I/O Board fuse.
Check fuse replace as
necessary.
Machine is out of
service.
See Diagnostics Errors
list to determine cause
of out of service.
Loose connection.
Check harness at bill
validator and Atlas
board.
Coin Mech low on
coins.
Fill coin tubes.
Bill path obstructed /
dirty.
Clear / clean path.
Wrong option switch
settings.
Refer to manufacturers
manual and reset.
Incompatible bill
validator.
Replace.
Defective bill validator. Replace.
Defective Atlas Board. Replace.