Creality Ender-3 User Manual

Tip: Steps: Put flat round head M5X8 and MST screws into the material rack(as shown), place the
spool holder on the rack and fix on the profile with screws(as shown); Put the indication knob on the
motor shaft and then place the 2020 profile cover on both side.
14. Material rack x 1
15. Material pipe and nut x 1

Creality Ender-3 Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Nozzle Temperature	255°C
Max Bed Temperature	110°C
Connectivity	SD card, USB
Supported Materials	PLA, ABS, TPU, PETG
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Machine Dimensions	440 x 410 x 465 mm
Display	LCD
Bed Leveling	Manual
Print Speed	180 mm/s
Power Supply	24V