details and operation and maintenance instructions.
A Notes
Product introduction
Spare parts
B Assemble the 3D printer
C Use the 3D printer
Start printing
Wire connection
Troubleshooting
NOTES
1. Do not use the printer any way other than described herein in order to avoid personal injury or
property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest
placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause
poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS
or PLA to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong
power outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands
away from machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled
in the printers moving parts leading to burns, possible bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch the
nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth
to remove dust, adhered printing plastics or any other material off the frame, guide rails, or
wheels. Use glass cleaner or isopropyl alcohol to clean the print surface before every print for
consistent results.
10. Children under 10 years of age should not use the printer without supervision.
11. This machine is equipped with a security protection mechanism. Do not manually move the
nozzle and printing platform mechanism manually while booting up, otherwise the device will
automatically power off for safety.
12. Users shall comply with related nation and region’s laws, regulations and ethical codes where the
equipment or produced prints by it is used, and users of our product shall not use aforesaid
products to print any end-use products,objects,parts or components or any other physical prints
that violate the national or regional laws, regulations and ethical codes where herein referred
product and produced prints by it is located.
Product introduction
To Next Page
Loading...
Need help?
General
