Creality Ender-3 User Manual

break of nozzle.
5. Generate G-code, and save the geode file to TF card.
6. lnsert the TF card ➔ press the knob ➔ select the menu
➔ the file to be printed.
Warning: File names must be Latin letters or numbers, not Chinese characters or other
special symbols.
Tip: Notes: For details on the software instructions, please refer
to the slicing software manual in the memory card!
Print

Creality Ender-3 Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Nozzle Temperature	255°C
Max Bed Temperature	110°C
Connectivity	SD card, USB
Supported Materials	PLA, ABS, TPU, PETG
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Machine Dimensions	440 x 410 x 465 mm
Display	LCD
Bed Leveling	Manual
Print Speed	180 mm/s
Power Supply	24V