6 • DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696C
To change a static IP address, tap Off under DHCP Enabled. Then, tap Set Static IP
Address Settings to display the Ethernet Setup - Static IPs screen.
Ethernet Setup - Static IPs Screen
To edit the static IP address, static subnet mask, static default router, preferred DNS, or
alternate preferred DNS, tap the text field underneath the setting name.
The on-screen numeric keypad is displayed for the chosen setting.
Edit IP Address On-Screen Keypad
To Next Page
Loading...
