Crestron DGE-100 - Control System Connections

22 • DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696C
Control System Connections
Click Control System Connections to view the status of a connected control system.
Status Page - Control System Connections
The following Control System information is displayed:
• IP ID: The IP ID used to connect the DGE to the control system
• Room ID: The control system room ID that the DGE is associated with (for
connections with the Crestron Virtual Control server-based control system)
• IP Address/Hostname: The control system IP address or hostname
• Type: The control system connection method
• Server Port: The control system server port
• Connection Type: The control system connection type
• Status: The control system connection status
• Encrypt Connection: Reports the status of an encrypted control system
connection (A
true message indicates that an encrypted connection is active,
while a
false message indicates that an encrypted connection is inactive.)