Supplemental Guide – DOC. 7696C DGE-100/DM-DGE-200-C: Digital Graphics Engines • 41
Configure Date/Time
Click Configure Date/Time to configure date and time settings for the DGE.
Device Page - Configure Date/Time
• Time Synchronization
- Enable Time Synchronization: Toggle the switch to turn time synchronization
via SNTP (Simple Network Time Protocol) on or off.
- Time Server: With Enable Time Synchronization set to On, enter the SNTP
server used to synchronize the date and time for the DGE.
- Synchronize Now: With Enable Time Synchronization set to On, tap
Synchronize Now to synchronize the DGE with the SNTP server entered for
Time Server.
• Time Configuration
- Time Zone: Select a time zone for the DGE using the drop-down menu.
- Time(24hr Format): Select the time for the DGE (in 24-hour format) using
the pop-up menu that is displayed.
- Date: Select the date for the DGE using the pop-up calendar that is
displayed.
Click Save Changes next to the Configure Date/Time tab to save any changes. Click
Revert to revert to the last saved settings.
To Next Page
Loading...
