46 • DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696C
The following Update User settings may be viewed or configured:
• Name: The chosen username
• Password: Enter a new password for the selected user.
• Confirm Password: Reenter the password provided in the Password field.
• Groups: Add the user to one or more groups. For more information, refer to
"Groups" on page
47.
• Active Directory User: Toggle the switch to turn authentication via Active
Directory on or off for the selected user.
NOTE: A user must be added to an Active Directory group to be selected as an
Active Directory user.
Click OK to save any changes and to return to the Authentication Management > Users
page. Click
Cancel to cancel any changes.
Delete User
Click the trashcan icon in the Actions column to delete the user.
A pop-up dialog box is displayed asking whether the user should be deleted. Click Yes to
delete the user or
No to cancel deleting the user.
Create User
Click Create User at the bottom of the page to create a new DGE user. The Create User
dialog box is displayed.
Create User Dialog Box