DM-NVX-E30(C)/DM-NVX-D30(C)/DM-NVX-D80-IOAV Product Manual – DOC. 8425B
EDID (Extended Display Identification Data)
NOTE: EDID configuration is applicable to the DM-NVX-E30 and DM-NVX-E30C only.
EDID configuration allows management of the EDID that is to be sent to the upstream
device connected to the HDMI input of the DM NVX device. If an EDID other than the
default EDID is desired, use the web interface to configure the EDID.
Configure EDID on the HDMI INPUT page. In the EDID section of the page, select the
desired EDID. For additional information, refer to the online help of the web interface.
HDMI INPUT Page - EDID Configuration
To Next Page
Loading...
