Crestron DM-NVX-D30 - Analog Audio Output; Using the Web Interface; Using SIMPL Windows

To Next Page

To Previous Page

Product Manual – DOC. 8425B DM-NVX-E30(C)/DM-NVX-D30(C)/DM-NVX-D80-IOAV

•

Analog Audio Output

NOTE: Analog audio output configuration is applicable to the DM-NVX-E30(C) and

DM-NVX-D30(C) only.

The analog audio output can provide a stereo line-level signal to feed a local sound

system or sound bar. The output volume is adjustable via the web interface or

SIMPL Windows.

Using the Web Interface

Configure the volume of the analog audio output on the Output page. Set Analog Audio

Volume to the desired volume.

Output Page - Analog Settings Configuration

For additional information, refer to the online help of the web interface.

Using SIMPL Windows

Using the top-level programming slot for the DM NVX device, set the

<AnalogAudioOutputVolume> analog input join to the desired volume. For additional

information, refer to the SIMPL Windows help file.

Other manuals for Crestron DM-NVX-D30