Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 60
COLOR WB MODE AUTO Fully automatic white balance.
ATW Auto-Tracing white balance mode.
ONE PUSH Trigger one-time WB adjustment.
INDOOR Best for warm lighting.
OUTDOOR Best for natural sunlight.
MANUAL Fully manual white balance adjustment.
SODIUM LAMP Best for sodium gas light.
FLUO LAMP Best for fluorescent light sources.
R. / G. / B.
GAIN
-7 - +7 Adjust color channel balance.
SATURATION 0 - 14 Increase / decrease color saturation.
HUE 0 - 14 Adjust hue for color tint compensation.
PAN TILT
ZOOM
PAN / TILT
SPEED
0 - 8 Adjust the speed of camera movement.
PTZ TRIG AF x1 - x12 Auto-focus after moving camera.
RATIO SPEED ON/OFF Pan/Tilt speed relative to zoom ratio.
SYSTEM
ADDRESS 1 - 7 Choose cam address for serial comm.
PROTOCOL VISCA Choose protocol for serial
communication.
PELCO-D
PELCO-P
BAUDRATE 2400 - 34800 Set baud rate for serial port.
VIDEO FORMAT 720p50 - 1080p60 Change video resolution & frame rate.
CLOSEUP MODE SINGLE/DIALOGUE Dialogue enables automatic side-by-side
when people talk back and forth.
STATUS SHOWS SYSTEM
SETTINGS
RESTORE
DEFAULTS
YES / NO
Video Settings
The VIDEO menu adjusts various settings that can help adjust the camera’s video output to your specific
needs.
DNR – Digital Noise Reduction
The Sony Exmor image sensor in this camera offers integrated 2-step noise reduction that helps combat
noise than can appear when the camera has to compensate for dim lighting.
2DNR is the first level of noise reduction. When on, up to five levels can be set. High levels of 2DNR
should only be used in low-color settings.
To Next Page
Loading...