Crestron IV-CAMHK-12-SLVR-1B - OSD Menu Tree

59 • IV-CAMHK-12-SLVR-1B Product Manual — Doc. 9311C
To return to a previous menu page, press Return.
Pressing the Menu button on any control device while anywhere in the menus will close the menu
entirely.
CAUTION: Always stop tracking before entering the OSD menu as it may cause random changes in
system settings that can severely impact image quality.
NOTE: Restoring the settings to factory default will not reset Address, Protocol, Baud Rate, Video
Format and Mount settings. Likewise, tracking settings will remain unaffected.
OSD Menu Tree
VIDEO SHARPNESS 0 - 15 Increase / decrease video sharpening.
BRIGHTNESS 0 - 14 Adjust video brightness.
CONTRAST 0 - 14 Adjust video contrast
GAMMA MODE 0 - 4 Adjust video gamma correction.
2DNR LEVEL OFF, 1 - 5 2D Noise Reduction level.
3DNR LEVEL OFF, 1 - 5 3D Noise Reduction level.
WIDE DYNAMIC OFF, 1-5 Adjust intensity of dynamic range
extension.
EXPOSURE MODE FULLAUTO Automatically adjust exposure.
MANUAL Manually adjust exposure.
SHUTTER PRI Shutter priority mode.
IRIS PRI Iris priority mode.
BRIGHT PRI Brightness priority mode.
EXP COMP ON / OFF Exposure compensation on / off.
LEVEL -7 - +7 Adjust level of exposure compensation.
BLC ON / OFF Turn Back Light Compensation on / off.
ANTI FLICKER OFF / 50Hz / 60
Hz
Reduces flicker induced by 25p / 30p
frame rates.