Supplemental Guide – DOC. 8226D TSR-310: Handheld Touch Screen Remote • 9
Select Access Point Screen
Use the Select Access Point screen to connect the TSR-310 to an existing WAP that is in
range or to configure a new WAP.
NOTE: The TSR-310 alerts the user if the desired WAP is not included in Crestron's list of
recommended WAP brands. The TSR-310 has been tested and verified to work with the
following WAP brands:
• Aruba Networks® access points
• Cisco® access points
• Crestron access points
• Luxul access points
• Pakedge® access points
• Ruckus® access points
• Ubiquiti® access points
To Next Page
Loading...
