Supplemental Guide – DOC. 8226D TSR-310: Handheld Touch Screen Remote • 11
Encryption Screen
7. Tap the appropriate type of encryption used by the access point.
8. Tap < BACK.
9. Tap the Password field on the Confirm Info screen.
10. Enter the access point connection password using the on-screen keyboard.
11. Tap SAVE to save the password or CANCEL to discard any changes.
12. Tap Assign Access Point on the Confirm Info screen once all access point
information is entered. The
WAP Connect screen is displayed.
WAP Connect Screen
To Next Page
Loading...
