Crestron TSR-310 Supplemental Guide

54 • TSR-310: Handheld Touch Screen Remote Supplemental Guide – DOC. 8226D
Crestron Admin Portal - Status (Linked)
NOTES:
∙ To unregister the control system from the voice services provider, tap the
red button at the bottom right of the page. The registration process must
be completed again to reregister the control system with the voice
services provider.
∙ The control system must be unregistered from the same registration
portal (Amazon or Google) that was used to register the control system.
∙ If the control system is restored after it has been registered, voice control
does not work on the TSR-310 unless the control system is unregistered
from the voice services provider and then reregistered.
12. Use the TSR-310 setup pages or web configuration utility to enter the IP address
or hostname of the control system linked to the voice service provider, and enter
the IP ID assigned to the TSR-310 in the voice registration program.
13. Navigate to Voice Control in the TSR-310 setup screens.
14. Tap Pair to pair the TSR-310 with the voice control provider. If the registration is
successful, a "Registration successful" message displays, and the
Enabled
indicator on the top right of the screen turns green.

Crestron TSR-310 Specifications

General

Brand	Crestron
Model	TSR-310
Category	Remote Control
Language	English